transparent gif


Ej inloggad.

Göteborgs universitets publikationer

The electrochemical oxide growth behaviour on titanium in acid and alkaline electrolytes.

Författare och institution:
Young-Taeg Sul (Institutionen för de kirurgiska disciplinerna, Avdelningen för biomaterialvetenskap); Carina B. Johansson (Institutionen för de kirurgiska disciplinerna, Avdelningen för biomaterialvetenskap); Yongsoo Jeong (-); Tomas Albrektsson (Institutionen för de kirurgiska disciplinerna, Avdelningen för biomaterialvetenskap)
Publicerad i:
Medical Engineering & Physics, 23 ( 5 ) s. 329-46
Artikel, refereegranskad vetenskaplig
Sammanfattning (abstract):
Titanium implants have a thin oxide surface layer. The properties of this oxide layer may explain the good biocompatibility of titanium implants. Anodic oxidation results in a thickening of the oxide film, with possible improved biocompatability of anodized implants. The aim of the present study was twofold: (1) firstly, to characterize the growth behaviour of galvanostatically prepared anodic oxide films on commercially pure (c.p.) titanium and (2) secondly, to establish a better understanding of the electroche0mical growth behaviour of anodic oxide on commercially pure titanium (ASTM grade 1) after changes of the electrochemical parameters in acetic acid, phosphoric acid, calcium hydroxide, and sodium hydroxide under galvanostatic anodizing mode. The oxide thickness was measured by Ar sputter etching in Auger Electron spectroscopy (AES) and the colours were estimated by an L*a*b* system (lightness, hue and saturation) using a spectrophotometer. In the first part of our study, it was demonstrated that the interference colours were useful to identify the thickness of titanium oxide. It was also found that the anodic forming voltages with slope (dV/dt) in acid electrolytes were higher than in alkaline electrolytes. Each of the used electrolytes demonstrates an intrinsically specific growth constant (nm/V) in the range of 1.4--2.78 nm/V. In the second part of our study we found, as a general trend, that an increase of electrolyte concentration and electrolyte temperature respectively decreases the anodic forming voltage, the anodic forming rate (nm/s) and the current efficiency (, while an increase of the current density and the surface area ratio of the anode to cathode increase the anodic forming voltage, the anodic forming rate and the current efficiency. The effects of electrolyte concentration, electrolyte temperature, and agitation speed were explained on the basis of the model of the electrical double layer.
Ämne (baseras på Högskoleverkets indelning av forskningsämnen):
Materialteknik ->
Bearbetnings-, yt- och fogningsteknik ->
Klinisk medicin ->
Odontologi ->
Titanium implants; Anodic oxidation; Oxide growth behaviours; Electrochemical parameters
Postens nummer:
Posten skapad:
2009-01-09 14:21
Posten ändrad:
2011-01-20 09:58

Visa i Endnote-format

Göteborgs universitet • Tel. 031-786 0000
© Göteborgs universitet 2007